MIL DSYNT 001400

                                        

MIL DSYNT 001400 is a dual CW sythesizer based on two independent frequency sources programmable by the front panel keyboard. It adopts the latest DDS technology allowing low phase noise and high spurious rejection. The internal logic board permits an easy use, sweep capability, frequency offset setting and all parameters storage in a non - volatile memory.

It has been crated for  applications such :

  • Laboratory use for general purpose measurements
  • IMD testing
  • Replacement of old  VHF-UHF Transponders local oscillators (typ. retrofit for DVB-T)
  • Frequency source for up and down converters

 

sintetizzatore

 

Main Specifications *

Frequency Range 100 KHz - 400 MHz (or 100-KHz -800 MHz as option*)
Stability ± 2 ppm by default
Phase Noise -70 dBc @ 10 Hz; -110 dBc@1 KHz
Spurious Rejection -75 dBc
Output Power 0 dBm typ.
Min. Resolution 1 Hz (2 Hz with Option 2)
Output Impedance 50 Ohm
Output Connectors N Precision female
Prime Power 230 VAC, 50 Hz
Dimensions 240 (D) x 450 (W) x 95 (H) mm – 2U Rack St.19”
Option 1 (Extended Frequency Range) * 100 KHz-800 MHz
Option 2 (Extended Frequency Stability)  ± 0.15 ppm
Option 3 (Extremely High Stability (GPS source) < 3X10-12  ( Avg. over 24 hours  GPS locked)

   
Please note the specification listed have to be intended such generic. Each synthesizer can be customized upon request. Contact Millimetrica at Questo indirizzo email è protetto dagli spambots. È necessario abilitare JavaScript per vederlo.  to submit your desired configuration and specifications.


Typ. Phase Noise plot at 200 MHz

 


Typ. Spectrum plot at 200 MHz C.F