MIL 050-200 SAT 

IF SATCOM MULTICHANNEL AMPLIFIER

 

MIL 050-200 SAT is multichannel amplifier system for IF Satcom applications. It has been designed to recover the IF Satcom cable losses, with hot swappable multichannel amplifiers fit in a modular 2 U rack 19" chassis (plugs in and mainframe) with redundant  linear power supplies.

Its broadband frequency range (50 to 200 MHz) matches all typ. IF Satcom frequencies (70 or 140 MHz), allowing high dynamic amplification (+35 dBm OIP3) with low noise capability.

Many system parameters such the amplifiers consumption and power supply operations can be controlled by the internal diagnostic system via front panel or by  the RS232 interface.

 

 

General Specification

Frequency Range 50 to 200 MHz
Number of channels 12 Amplifiers + 2 Power supply  
Impedance (In/Out) 50 Ohm unbalanced
Amplifiers Gain >18 dB (each channel)
P1 dB +21 dBm typ.
Flatness +/-0.3 dB typ.
VSWR IN 2.0:1 typ.
VSWR OUT 1.50:1 typ.
OIP3 +35 dBm
Noise Figure 1 to 2 dB max.
In/Out RF Connectors  BNC female
Prime Power 230 VAC, 50 Hz
Type of power supply linear with redundant configuration
Prime power connector VDE standard socket 
Case 2U, 19" st rack mount, 358,4 mm depth
Operative temperature 0 to 40°C (relative humidity 95%)
Storage temperature -10 to 40°C
Control Interface and diagnostic system Via front panel or by RS232